New desk, new models

So, a little late again. It's remarkable how much time it takes to unpack things. It doesn't help I'm prone to reorganising things. But! I now have somethings like a workspace set up. It's not completely done yet but it's pretty close.

Workspace, getting set up.

Sadly we're renting so the wallpaper stays. I'm thinking to make some cheap screens with bamboo trellis and butchers paper to reduce the amount of green. On a brighter note, where I'm standing taking the photo is five or six metres of north facing window so plently of daylight when it's not winter. It'll be too hot to keep minis in during summer, so there's a big shelf in the next room for finished and WIP things, and piles of room in the garage for boxes and stuff.

There are a few things that need doing - definately need some sort of paint holding setup - I'm thinking to make something that will hold four rows of paints that I can fit in the shelf where paints are currently just jammed in. This should keep them off the desk and hopefully I can maintain some semblence of order. Hopefully.

I also got the Sevrin Loth Forge World kit for my birthday. Not that I really need new minis, but he is nice. I don't play Red Scorpions, so there'll be a bit of conversion work.

Sevrin Loth de Milo

Fortunately most of the kit doesn't come with a lot of chapter markings. It's based on the command squad kit, so will also be good for bits.

The full kit.

There's a decent banner that's not too scorpion-y, so it'll stay.

Company or chapter banner? Not sure yet.

The scorpion heads will need a bit of work, but they are a good set. The scorpion tail will probably become a crest.

Scorpion heads - a bti of work here

The style fits nice with my current force commander (of as yet unknown rank) so they can become his honour guard. Perhaps a chpatermaster since everone else is pretty down to earth.

The force commander is a Masters of the Chapter guy
with a fancy helmet and backpack.

The torsos continue the theme nicely. They are nicely detailed.

The whole kit came out really well (always nice give FW can be hit and miss). Apart from a few bubbles, the only problem was one of the axes needs the blade filling in which will be a whole lot of no fun.

The left axe will need a little filling in on the blade.

Given that's my only complain I reckon I can be pretty happy. It'll be fun putting these guys together. The parts will also be able to be spread nicely around the army, which is a bonus.

Imperial Armour - Model Masterclass Volume Two [Review]

OK, I'm a bit late, but I'm still sorting out out things after moving. I've only just started getting the hobby room together, so I haven't done any modelling or painting, but it was just my birthday and my lovely girlfriend bought me the new IA Model Masterclass.

For those not in the know, Forge World released a book of advanced paiting and modelling techniques back in 2008. The Forge World painting style is quite strongly informed by miltary and historical painting techniques. This is very interesting to me, since in the late 90s I did a fair bit of historicals stuff.

Model Masterclass Volume Two is very much a follow on from Volume One, containing few new techniques but more examples of their use, and some nice twists on techniques. I'll not really look at Volume One here, except as a point of comparison.

These are actually rectangular. I'm just using
a flash since the tripod is packed away.

The Book

The book is printed on the same high quality stock of all Forge World books. At 143 pages it is longer than the first, having about the same mix of long and short articles. The copy editing is generally good, though with a glaring mistakes in page references (page 10 referred to as 67) and some confusing jumps in the picture titling composition (a section talking about weathering tracks and hatches, where the framing gradually shift from the both hatch and track to just the hatch; another talking about washing tracks, with a picture of a washed gun mount hub), and the text reads well. For Forge World (and Games Workshop), the editing is well above par.

The framing on this triptych is odd in that is moves from the hatch
to the track, but the narrative doesn't really follow it.

This is not a track, however much they try
and convince me otherwise.

The picture quality of Volume Two is better than Volume One. In the original there were quite a few shots with white balance and other colour issues, whereas in Volume Two, while there, they are not as critical. While not so important in most books, when you are talking about building up colour with Commando Khaki followed by Skull White, it helps if two near identically painted pieces always appear identical. If not then it is a little confidence shaking - how accurate are the rest of the pictures? At least being close seems like it should be important in a painting book.

From Volume One - the circled parts are the same,
and should be the same colour.

Volume Two also contains the opening tools and paints section from Volume One as an appendix. The picture has been updated with their new work bench, so It's intersting to see how it's changed in four years (the answer is not much - they do have a new air compressor!).

The Models

Like Volume One, the focus is on Imperial Armour (no real surprise here!), but has more non-imperial stuff. There are several short articles on Eldar and Chaos Daemons, and some good long pieces on the Great Brass Scorpion and the Choas Reaver Titan. A good range of subjects are presented,

The terrain and diorama articles are a good mix of display boards and battle boards. They present a good range of scenery, and the last one is an Ork camp, which was very nice to see (and looks painful in its complexity).

By and large, the pictures are well framed so you can really see what's going on.

Wonderful looking and some interesting techniques

The Masterclass

As has already been mentioned, Volume Two is a follow on from Volume One. The lessons are written clearly and concisely and are mostly well illustrated. There are a few instances where the steps taken or tools or paints used become a little unclear, but these a such a small handful and a second reading will remove confusion.

The most detail in either book is in the first sections of Volume One. Volume Two largely continues on from the latter part of Volume One, with less detail and more examples. That isn't to say there aren't a bunch of new techniques. They have assimilated many of the popular techniques of the last few years, and add a few new spins to things like layering (for instance using the less popular Tamiya paints - at least in fantasy modelling circles - for their reds and clears), and new tricks with oils.

It is a masterclass, so it does assume some knowledge and skill in painting. I'd heard this complaint after Volume One came out: "I just doesn't tell me enough." And if you are expecting a from the beginning guide to painting, you still won't get it in Volume Two. As in most fields, this suits those willing to ask questions of themselves and what they want from painting (my other hobby is audio, and I've seen the same problem in masterclasses there - you need to push and ask questions, and have learnt how to learn to really get anything out of it).

Another useful thing it does is reinforce flexibility. The same techniques are used over and over, but but with subtle differences and alternate combinations. Sepia wash, brown ink and gloss varnish can be used to make oil stains. Replace brown with black for dark, greasy stains. Add powders for grease. Just the brown ink and varnish can be spilled oil by adding some water.

My general feeling is that the techniques in Volume Two are slightly more accessible - they rely less on oils and powders (except for basic powder sippling), more on airbrushing and washing. I don't think this is a bad thing as (especially) oils can be quite intimidating.

Another good note is they don't suffer from marketting pressures - while GW products are prefered when offering very simillar things (especially acrylics and weathering powders), they aren't affraid to use other products when needed.

The Breakdown

It might look a bit like I'm picking faults with the book, but I think how much the very few problems stick out is indicative of the quality. Overall, a good read, and well worth it for me. It's especially worthwhile if you prefer gritty style painting. On its own, I'm not sure it would hang together that well unless you are really prepared to go out and make mistakes with new techniques. When taken with Volume One, I think the whole pacakge is greater than the sum of its parts, and that's where the best value lies.

Those who will benefit most are experienced painters who want more, and inexperience painters looking for a style of their own. But if you just like the pictures, this is also a good book with plenty of eye candy. I, for one, am looking forward to trying a few of these techniques.

You can also check out a review by Karitas over at Excommunicate Traitoris here.

Other Books

'Eavy Metal Masterclass

I thought it would be good to drop this one in, since it's a more basic masterclass. It still lacks the very basic stuff from the How to Paint Citadel Miniatures guide (the newest version of which is actually very good!), but has an excellent selection of step by steps. I found this most useful for helping me get back my sense of colour choice.

The 1989 edition.

Citadel Miniature Painting Guide (1989/92)

The first painting guide I ever had. This is still an excellent painting primer. The styles may be a little dated but the presentation is excellent and it has a certain joie de vivre lacking in more recent publications. It also makes you realise that fine model detail isn't always needed to make a great painted mini. Having seen both (and owning the 1992 one), the later (blue) one is slightly better and has good show case of models from the time.

The Model Makers Handbook - Albert Jackson and David Day (1981)

The second modelling book I ever owned. This was my dad's and all sorts of modelling. There are great sections on reposing, battle damage, dioramas, and all sorts of other things. It had some great techniques like using an buff enamal wash to simulate dust and how to scratch build plants.

Warning - Mines

Still unpacking after last weeks move and without computer, so I'm trying an update from my tablet. A little hard to get good photos, but here are some of the mine field I put together a while back. I wanted something multipurpose, and with a bit of whimsy. I though there ought to be a good explanation as to why people are blundering about into minefields, so long grass and a broken sign seemed in order.

These were made first as a single 10"x6", then split. This was to allow it to be used as a single minefield for planet strike (some one correct me if it's some other supplement that used the 10"x6" minefield), or as loose dangerous terrain.

The pieces were cut from MDF. The crater was made from spare milliputt, formed in a simple ring. The mines, skulls, sign and other bits were all glued straight to the MDF. The whole lot was covered with plaster and medium sand to add shape and texture.

The base was painted using watered down poster paints and a touch of detergent to help it flow, which was then drybrushed with bleached bone. The same scheme and weathering as the bombs was used for all the detail.

The whole lot was covered with long grass from Woodland Scenics. This stuck well, except for a small bald patch in the middle of the crater.

All in all, I'm happy with how these turned out. They look better in person, so I'll try and get some better photos when I'm set up for it. The only downside is the grass is quite springy, so there's a risk it would really be dangerous terrain for any top-heavy minis.

Bombs!

Bombs!

It's going to be a busy few weeks ahead for me. We just signed a lease for a new place. this means much more space, but also means moving. So:

There's more stuff hidden at the back

I've put up some bomb markers (from the 40K resin bomb set) that I painted a couple of years ago. These are quick photos so I haven't worked out the focus on all the shots, but you should get the idea.

These are all painted in acrylic, with oil washes and powders for weathering. I also used latex on the signs for chipping, and oil-powder mix for the rust. Acrylics by GW, oils by Daler Rowney and powders by MIG.

They're sealed in with Humbro Matt Cote from an airbrush to make them table ready. Mid layer varnishing was a mix of GW and Long Life floor polish (the latter through the airbrush).

Basing is GW sand and Scorched Grass. The tall grass is by Noch.

The snow is baking powder, I didn't like (looks great, but is too fragile - would work best, as with the GW, for making slush), covered with Noch Powder for the deep drifts. I've tried GW static snow on some other models (who will no doubt apear soon enough), and I didn't like it - too shiny and you can see the fibres.

Out of time this week, but if anyone want more info, ask away in the comments box.

Starting at the beginning

Back four years ago I signed up for blogger so I could follow a bunch of painting, modelling and 40K blogs easily. I thought maybe I'd start blogging my own stuff someday. Blah, blah, four years later, I'd been slacking off hobbies and I read Joel at Mordian 7th had hit four years and 250 posts, while doing a whole lot of stuff, while I'd painted a few guys. I mean, I had recorded a few albums for people, changed jobs a couple of times, so it's not like I wasn't doing anything, but I thought maybe a weekly blog could help me be a little more consistent in my output of minis.

So here's the first post. The aim for this to be a Sunday blog; one post a week, every Sunday. It'll mostly be 40K for now, and mostly painting since I don't play much. I'll kick off with a state of play.

The current project is Azhag the Slaughterer. I don't play WFB, but I do like the model. Azhag is done, I'm working on the banner with Skullmuncha still to do.Since this whole thing is a bit of whim, there are no fresh photos. But here are two showing the putty work and pins on Skullmuncha.

Skullmuncha - lots of liquid greenstuff. You can also see the pin for his other wing. He's attached to a small piece of craft fibreboard for undercoating.

I've totally removed the stock base resin so I can mount him on a custom base.

Skullmuncha - none of his limbs fit very well so they were all pinned and filled with grey stuff. This was left a little hollow, and once hardened, more grey stuff was put on an sculpted.

I have a few (!) other things that are waiting to be done. A few Dystopian Wars armies. The plan is to keep them fairly simple.

Kindom of Britania landship - watching TV and sanding resin.

The big one is the 40K marine company and guard irregulars.

Jump marine

Jump Chaplain

Terminator

The hoard

There is a plan for all these guys, but it might take a while to get through them all. On to next Sunday!